ClearSounds CS-A55 User's Guide download pdf (Page 10)

10 – ENGLISH

11 – ENGLISH

Last Number Redial

Press the TALK button, then press R/P button to redial the last number

dialed.

CH Button

During the conversation, the phone will scan the clear channel

automatically. If you still hear noise or static, press the CH button to

nd a clearer channel.

NOTE: It takes approximately 2 seconds for the unit to scan a channel.

Pause Function

This function allows you to insert a temporary pause during a dialing

sequence. For example, when using a calling card, some telephone

company systems will not register the entire number without inserting a

pause between the card number and the telephone number. To insert a

pause use the R/P button. 1-800-123-4567 R/P 1-800-965-9043. This

allows adequate time for the telephone company’s system to register

the numbers and complete the call.

Battery Low warning and shut down protection

Once the battery voltage is low, the low battery icon will turn on. The

low battery warning tone will also be generated if the handset is in talk

mode. You can press TALK button to return to standby mode, then

place the phone on the base to recharge.

Out of Range Warning

In talk mode, if the handset is too far away from the base unit, an out of

range warning tone will be heard. You should move closer to the base

unit. It not, the handset will automatically return to standby mode after

about 20 seconds. When the handset makes a noise, press the  button

to return to standby mode.

CS-A55-TriLingual.indd 10 5/28/08 9:10:31 AM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 69 70

No comments

ClearSounds CS-A55 User's Guide Page 10