ClearSounds Talk500 User Manual download pdf (Page 9)

8 – ENGLISH

9 – ENGLISH

2. At the end of the call, return the handset to the cradle or press

button again.

Call Waiting

Many special telephone services, such as Call Waiting, require a switch-hook

signal. For example, if you have Call Waiting, you can put a call on hold and

take a second incoming call on the same line by pressing CALL WAITING

button. Press CALL WAITING again to alternate between the two calls.

Note: If you do not have any special phone services requiring a switch-hook

signal, pressing CALL WAITING might disconnect the current calls.

Message Waiting Indicator

If you have Voice Mail Service from your local phone company, when you

are unable to answer a call, the incoming call will be forwarded to a mailbox

where the caller can leave a message. Your Talk500 will display MESSAGE

WAITING if a recorded message has been left. The New Call LED will blink

until the message is retrieved.

Or you can press the DELETE button once, the display shows DELETE ?,

press and hold the DELETE button to turn OFF the New Call LED and the

MESSAGE WAITING message.

Note: Subscription is required to use the Message Waiting services.

Hearing Aid Compatibility

This unit is compatible with inductively coupled hearing aids and cochlear

processors. Adjust your hearing aid’s or processor’s “T-switch” to the “T”

position. Make sure to hold the handset close to your hearing aid or processor.

THE PHONE BOOK

Important: When using the phone book features, please note it is only available at

phone book mode ( icon turns on). If the icon is off, press button once.

Storing numbers in the phone book (Can be stored up to 30 lists)

1. Press and release the MENU button until STORE NUMBER is shown.

2. Press the DIAL button. The cursor will ﬂash in the ﬁrst position.

3. Enter the required telephone number with a maximum of 22 digits using the

number pad and conﬁrm with DIAL button.

4. Enter the required name with a maximum of 16 letters. The next section will

tell you how to enter names.

5. Conﬁrm with DIAL button. The display now shows NAME RECORDING.

6. To record voice, hold down DIAL button, speak clearly into microphone after

a beep and “VOICE” icon ﬂashing. Release the button when you ﬁnished or

the unit will stop recording after 3 seconds. The voice prompt will then be

played automatically.

7. You can repeat step 2 to 6 to enter more numbers or press button to exit.

Note: When the memory location is full, FULL will displayed.

Talk500UserGuide.indd 9 2/4/08 5:10:22 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Comments to this Manuals

No comments

ClearSounds Talk500 User Manual Page 9

Comments to this Manuals

Related products and manuals for Telephones ClearSounds Talk500