ClearSounds v407 User Manual download pdf (Page 33)

Caller ID information does not show

1. Make sure you are subscribed to Caller ID through your local phone company.

2. Check batteries.

No Caller ID information while on a call

1. Make sure your service provides Caller ID Information while you are on a call. This

is sometimes known as “Caller ID on Call Waiting” or “Type II Caller ID”.

2. Make sure you have the Caller ID – Caller Waiting feature on this phone set to ON

(See page 26).

3. The phone cannot display the information if another phone on the same line is in

use. Make sure all extensions are on hook.

Cannot dial out of Caller ID

1. Make sure you are subscribed to Caller ID through your local phone company.

2. Make sure your area code is set up properly (See pages 27).

Speciﬁcations

Maximum Gain:

42 dB in Wide band (300 to 3400Hz)

52 dB max Low Frequency (Bass 300 Hz)

52 dB max High Frequency (Treble 3400Hz)

Maximum Outgoing Gain:

+12 dB

Dimensions:

Size: 10.5” (with Caller ID screen ﬂat) X 8” X 2”

Weight: 4.33 lbs

Power Requirements:

AC Power Adapter: Input: 120 VAC, 60Hz, 26W. Output: 12V DC 1000 mA

Batteries: (4) AAA Alkaline batteries (not included)

FCC Registration Notice

THE INFORMATION INFORMING THE USER OF HIS/HER AND THE TELEPHONE

COMPANY’S RIGHT AND OBLIGATION IS OUTLINED BELOW.

a) This equipment complies with Part 68 of the FCC rules and the requirements adopted

by the ACTA. On the bottom of this equipment is a label that contains, among other

information, a product identiﬁer in the format US:AAAEQ##TXXXX. If requested,

this number must be provided to the telephone company.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 107 108

No comments

ClearSounds v407 User Manual Page 33